Mark4, XL10 and APEX-HD frame listings provide different mechanical layouts for your component sourcing.
The listed F405 V3 stack combines the flight controller and 4-in-1 ESC in a single purchasing option.
Transmitter and receiver options let you specify the control components needed for a build or replacement order.
Source goggles, separate monitors and VRX units according to the video-receiving arrangement you require.
FPV Accessories for Assembly and Parts Supply
Xingkai supplies FPV accessories for companies assembling aircraft, sourcing parts for resale or replacing components in an existing setup. The range spans frame kits, flight controller/ESC stacks, motors, ELRS control modules, goggles, monitors, video receivers and fiber-optic equipment.
You can source Mark4, XL10 and APEX-HD frames for the mechanical side of a build, then select the control and viewing components separately. Where footage needs to be recorded, DVR-equipped goggles or monitors provide that option. We supply Xingkai products alongside listed third-party items such as Foxeer Datura motors, with each product identified in the quotation.
Send the parts and quantities you need, together with any existing model or interface details. We will check the requested model and configuration, quote the selected items and confirm the order conditions before arranging supply and shipment.
FPV Accessory Products Supplied by Xingkai
Select the actual product or component name for your order. Frames, electronics, motors, control modules and viewing equipment are supplied as separate products; third-party brand and product names remain identifiable and are not presented as Xingkai-made aircraft.
An ELRS receiver option listed for the 170 MHz control setup; match the ordered receiver with the corresponding transmitter configuration.
A separate ELRS transmitter module for the specified 170 MHz control setup, with the corresponding receiver selected for the order.
A transmitter option in the ELRS supply range; identify the requested hardware version and frequency in the component quotation.
A fiber kit listing for the specified fiber format. The quotation distinguishes the included modules, cable configuration and supplied components.
A separately listed fiber-kit option with its cable and module configuration identified for the ordered signal arrangement.
A fiber video-module option for a component order; specify the included air-side and ground-side equipment rather than assuming a complete drone.
The listed module provides an FC optical connector and GH1.25 product interface, with TTL/SBUS data and analog video formats for the selected configuration.
A separate module-set listing for a wired video/data arrangement, with the supplied endpoints and cable configuration defined in the quotation.
The F405 V3 flight controller and listed 60 A 4-in-1 ESC combination provides a single purchasing option for the selected hardware version.
A separately listed controller/ESC combination. Xingkai identifies the actual controller and ESC hardware versions before quoting the stack.
A separately listed F405 flight-controller product for a component order. The quotation identifies its hardware version and supplied items without assuming an ESC combination.
An EMAX Link transmitter option in the supplied ELRS range, retaining its product identity for the component order.
A 2.4 GHz ELRS receiver option to select alongside the requested control-transmitter configuration.
A separately listed ELRS receiver for the specified 915 MHz control configuration.
A transmitter-module listing for a control-component order; frequency and hardware version are identified with the corresponding receiver.
An ELRS receiver-kit listing supplied by component configuration. Specify the required receiving frequency and included modules for the quotation.
A compact 3-inch viewing option with a 5.8 GHz, 40-channel receiver and AV connections; an external DVR can use its AV output.
A 5-inch viewing option with a built-in DVR and TF card support up to 64 GB, for orders requiring onboard recording.
A separate goggles product in the viewing-equipment range, with the screen and recording configuration specified for the order.
A separately listed FPV goggles option; identify this product when comparing the receiving and viewing equipment for your build.
The Pro goggles listing remains a separate ordering option from 008D, with its supplied configuration identified in the quotation.
A separate monitor listing for open viewing and recording, with the receiver and DVR configuration specified for the order.
An open-viewing LCD monitor option supplied separately from goggles; confirm the required receiving arrangement with this product.
The listed 5-inch monitor combines an 800 × 480 display, 40-channel diversity receiver, DVR and replay functions.
A smaller monitor listing for an order requiring open viewing and a recording configuration.
A compact open-viewing monitor option with its product-specific screen and receiving configuration identified for the component order.
A separate video-receiver listing for a viewing arrangement that needs an external 4.9 GHz receiving unit.
A separate video receiver with AV output, for a matching lower-frequency transmitter and viewing-equipment arrangement.
A frame-kit option with a listed 427 mm wheelbase, supplied as mechanical components for the selected build.
A separate V2 frame-kit listing with a 387 mm wheelbase, for comparison with the other frame sizes.
The 8-inch V2 frame-kit listing provides a distinct mechanical size within the Mark4 component range.
A V2 frame-kit option with a 295 mm wheelbase; identify the version when requesting the frame components.
A transmitter-and-receiver product listed for RC car, boat and tank control. Its control requirements are checked for the intended equipment rather than assumed to suit a drone.
A 10-inch frame-kit listing with a 473 mm wheelbase, for builds needing this mechanical format.
A separately listed 8-inch frame with a 375 mm wheelbase, retaining its size distinction from the V2 range.
The Mark4 7-inch nominal frame is offered through several listings. Specify the selected arm, plate and included-parts configuration for the order.
A 5-inch frame with a 225 mm motor-to-motor specification and 19 × 19 mm camera mount for the selected component build.
A carbon-fiber frame listing for a 10-inch build; confirm the selected version and supplied mechanical components.
The V7 frame-kit listing is a separate version choice within the XL10 component range.
The V6 range includes listings with and without print parts. Specify the required included-parts configuration rather than assuming both supplies are identical.
A 9-inch APEX-HD mechanical frame option supplied separately for the selected build.
An 8-inch APEX-HD frame listing, providing a separate frame-size choice within the component range.
A 7-inch APEX-HD frame-kit option for an order selecting propulsion and electronics separately.
The 5-inch APEX-HD frame is supplied as a mechanical build component rather than a complete aircraft.
The listed Foxeer Datura motor is supplied as a separate component for a build or replacement-parts order.
Connections Available on the Listed Fiber Module
The module has an FC optical connector for specifying the required fiber connection.
The GH1.25 product interface identifies the electrical connection separately from the module’s FC optical connector.
TTL/S.BUS data-format support provides a control-signal option alongside the module’s analog video connection.
NTSC, PAL and SECAM video formats support an analog video path within the selected fiber module configuration.
Open Viewing or FPV Goggles
Choose the viewing format around how the equipment will be used. VR009 goggles provide a compact 3-inch display; the 800D Pro offers a larger 5-inch screen with DVR. Both are headset options when the operator needs a personal view of the video feed.
A separate 5-inch monitor supports open viewing during setup or demonstration, and its DVR and replay functions provide a recording option. Specify the viewing device and video source together when requesting a configuration quote.
Control and Video Connections
ELRS handles the control link, separately from video reception. Transmitter and receiver sourcing involves frequency, firmware and binding settings as well as the model name. The listed 2.4 GHz and 915 MHz receivers address different configurations. For a replacement order, the existing unit’s model helps identify which item is being requested; Xingkai checks the model and configuration before quoting.
View full-size imageKeep the VRX receiving band aligned with the video source. The listed 1.2/1.3 GHz VRX and 4.9 GHz receiver address different bands, while the 5-inch monitor includes 5.8 GHz reception. A separate receiver is a distinct component in the order, with its own output requirements; selecting a screen size alone does not specify the complete receiving arrangement.
View full-size imageThe listed fiber module provides a wired option for analog video and TTL/S.BUS data. Select the required module or kit configuration, including the requested air-side and ground-side items. The order conditions should identify that configuration rather than using a fiber-length label to imply the contents of every kit.
View full-size imageKeep the controller version with the ESC selection in the order specification. A controller/ESC stack identifies a combined product, while motors and receivers remain separate component choices. Model and version information also matters for repeat purchases, so the quotation should name the item selected for the order.
View full-size imageRF Development and Product Supply from Xingkai
Xingkai develops and produces RF communication equipment and supplies related wireless products. Our technical focus covers RF communication, baseband units and image processing. Your quotation identifies the selected product model and included equipment, so the supply scope remains clear when the project also needs related hardware.
Compare Dimensions and Connection Features
These specifications refer to the individual items shown. The order identifies the selected product and version.
- Frame Dimensions
- Receiving and Viewing Components
- Fiber Module Interfaces
| Listed Product | Frame Class | Wheelbase / Motor-to-Motor | Overall Dimensions | Arm Thickness | Other Mounting Data |
|---|---|---|---|---|---|
| Mark4 5-inch 225 mm | 5 inch | 225 mm motor-to-motor | 145 × 172 mm | 5 mm | Camera mount: 19 × 19 mm |
| Mark4 V2 10-inch 427 mm | 10 inch | 427 mm wheelbase | 268.18 × 332.07 mm | 7.5 mm | Bottom/middle/upper plates: 3 / 3 / 2 mm |
| XL10 V6 | 10 inch | 420 mm wheelbase | 297 × 297 × 35 mm | 7 mm | FC mounting: 30.5 × 30.5 mm; motor mounting: 16 × 16 / 19 × 19 mm; camera spacing: 19–20 mm |
XL10 V6 lists a weight of 280 g without 3D printed parts. Its With Print Parts and No Print Parts listings identify different configuration options; the selected items belong in the confirmed order configuration.
The Mark4 V2 10-inch frame has an X-type layout.
| Listed Product | Screen / Resolution | Receiving or Connection Features | Recording Features | Other Data |
|---|---|---|---|---|
| VR009 goggles | 3 inch / 480 × 320 | 5.8 GHz; 40 channels; AV input/output | AV output for an external DVR | Listed battery: 3.7 V / 1200 mAh; USB charging |
| 800D Pro goggles | 5 inch / 800 × 480 | AV jack | Built-in DVR; TF card support up to 64 GB | Listed battery: 7.4 V / 1200 mAh; 180 × 140 × 84 mm |
| 5-inch FPV monitor | 5 inch / 800 × 480 | 5.8 GHz; 40-channel diversity receiver | DVR and replay | Listed battery: 4000 mAh; 145 × 86 × 16 mm without antenna; 218 g |
| 1.2/1.3 GHz FPV VRX | Separate receiver | 9 channels, 1050–1380 MHz; SMA RF connector | — | 44 × 27 × 27 mm; 20 g without antenna |
| Listed Module | Fiber Connector | Product Interface | Data Formats | Video Formats | Data Direction / Rate |
|---|---|---|---|---|---|
| Fiber Optic Image Data Module Transmission to Ground Receiver | FC | GH1.25 | TTL / S.BUS | NTSC / PAL / SECAM | Bidirectional data; 0–1 Mbps |
From Parts Requirement to Supply
Use the selected models and quantities to define the order. Xingkai checks the requested configuration, provides a quotation and confirms the supply conditions with you.
Provide the parts or product types and quantities you need. Existing model, interface or mounting details can help describe the required configuration.
Xingkai checks the requested models and configuration, then provides the corresponding product and quotation information.
Both sides confirm the configuration, quantities and delivery conditions for the specific order.
Xingkai arranges supply and shipment according to the confirmed order conditions.
FAQs: FPV Accessory Order Questions
Compare like-for-like models, hardware versions, quantities and included items. A price for one monitor does not establish the cost of a complete component list. Xingkai checks the requested models and configuration before quoting; use that quotation to identify which products and quantities the offer covers, together with the order conditions agreed for that purchase.
No. They describe the component’s technical or mechanical interface, not the contents of a shipment. An FC fiber connector specification, for example, does not establish that a matching fiber cable is included. Identify required cables, antennas or printed parts in your enquiry. Xingkai checks the requested configuration, and the selected items and supply conditions are confirmed for the specific order.
The display specification alone does not establish the recording format. The 800D Pro has selectable recording sizes and records MJPEG video in AVI files; those recording settings are separate from its 800 × 480 display specification. If your project needs files for a particular playback or review workflow, include that requirement with the requested model so the configuration can be checked before quotation.
Complete the Rest of Your Procurement Brief
Explore video transmitters separately when your accessory order also needs an air-side video source.
Review digital video and data-link options when the project requires a dedicated link beyond the listed accessory modules.
Consider ground-control hardware when the purchase includes a complete control and viewing station rather than individual display accessories.
Review the drone platform range when the procurement brief covers an aircraft rather than a frame kit or separate components.
Request FPV Accessory Availability and Pricing
Send the parts or models you need and the quantities for each. If they must work with equipment you already use, include those model details. Xingkai will check the requested configuration and provide a quotation for the selected items.
