XK-F515RS 18× Wireless Gimbal Camera
XK-F515RS brings an 18× optical-zoom visible-light camera and a three-axis gimbal into a 2.4 GHz wireless viewing and control setup. A ground PAD receives the video and directs the camera with joysticks and buttons. Xingkai checks the selected camera, lens and ground equipment, then quotes the supply configuration for your project.
- 18× optical zoom brings a distant subject closer within the visible-light view.
- 2.4 GHz wireless video and control connect the payload to a ground PAD workflow.
- 1080p at 30 fps video and local TF recording provide live viewing and camera-side storage.
- Three-axis stabilization and zoom-dependent speed adjustment support wide-view positioning and closer observation.
XK-F515RS 18× Wireless Gimbal Camera Overview
Choose XK-F515RS when your project needs a steerable daylight camera with wireless viewing and PAD operation. The camera uses a 4 MP CMOS sensor, while its three-axis assembly lets the operator change the viewing direction without repositioning the whole platform. At higher zoom, a lower gimbal speed helps make smaller framing adjustments.
The selected model specification lists an 18× lens configuration. Xingkai identifies the supplied lens, focal-length range and ground equipment in the quotation so the order defines the camera and its viewing arrangement together. Local TF recording provides storage at the payload; the receiving PAD and any required accessories are agreed as part of the supply scope.
Technical Specifications
| Parameter | Configuration |
|---|---|
| Daylight sensor | 1/3-inch, 4 MP CMOS |
| Listed optical zoom | 18×; supplied lens and focal-length range confirmed in quotation |
| Video mode | 1080p at 30 fps |
| Video and recording | Wireless video; local TF recording |
| Wireless frequency | 2.4 GHz |
| Command mode | Joystick and button |
| Power supply | 3S or 6S |
| Power consumption | 8 W |
| Pitch travel | −90° to +90° |
| Roll travel | −85° to +85° |
| Yaw travel | −150° to +150° |
| Dimensions | 103 × 156 × 155 mm |
| Device weight | 745 ±10 g |
Connections and Integration
The camera uses a 2.4 GHz wireless video and control arrangement with joystick and button commands at the ground PAD. Its power entry is 3S or 6S, with 8 W consumption.
Specify the ground equipment you want to use so Xingkai can identify the matching camera and receiving/control equipment in the quotation. The supplied lens and focal-length range are confirmed with that configuration; a shared radio frequency alone does not establish compatibility with an existing PAD.
Specify the F515RS Camera and PAD Configuration
Define the F515RS lens and ground viewing/control arrangement in one order. The quotation identifies the supplied 18× camera configuration, lens/focal-length range and proposed PAD equipment, with antenna, mounting and recording-accessory scope itemised for that arrangement.
Send the scene and required viewing distance, intended ground PAD or existing equipment details, and the camera operations needed. State the 3S or 6S supply, mounting allowance, recording needs and quantity.
Xingkai checks the selected lens and 2.4 GHz camera/PAD arrangement, then quotes the camera configuration and proposed ground equipment with the agreed antennas, connecting, mounting and media scope.
Agree the supplied lens and focal-length range, PAD viewing/joystick arrangement and equipment quantities. Confirm the 103 × 156 × 155 mm, 745 ±10 g installation and 8 W camera load, then agree delivery terms.
Xingkai supplies and ships the agreed F515RS configuration and listed camera/ground-equipment accessories according to the confirmed order.
FAQs
State what the operator must see on the PAD and which joystick/button operations must remain available along the intended path. Include the proposed PAD, antenna arrangement and mounting heights, the route and obstructions, and the live-video task. These inputs define a camera-and-ground-equipment proposal rather than just a distance number. If the project has an acceptance requirement, distinguish live viewing/control from footage stored locally on the camera; the listed 10 km entry does not establish site acceptance.
No. The listed yaw travel is −150° to +150°, rather than continuous rotation. Check the required viewing directions against that travel before selecting the mounting orientation. Cable routing and clearance should allow the selected movement without relying on unlimited yaw; the gimbal’s travel range does not establish a clearance envelope for your platform.
Identify the PAD model, hardware/software version and the camera/control arrangement it currently uses. Ask for the proposed F515RS pairing and required ground-side configuration to be addressed before ordering the camera alone. If reuse is not established, request the matching ground-equipment scope as a separate quotation item rather than assuming every 2.4 GHz PAD is suitable. The selected lens/focal-length configuration should remain identified with that camera order.
The operating entry is −10 to +45 °C and 20–80% relative humidity. It does not specify an ingress-protection rating. If the planned installation faces rain, spray or condensation, include that exposure in the inquiry so it can be addressed in the selected equipment and order conditions. Do not treat the temperature and humidity range as evidence of waterproof construction.
The 745 ±10 g entry describes the camera device. Account separately for the mount, wiring and any platform-mounted radio equipment when assessing the installed payload. Ground-side equipment belongs to the ground-system supply list and is not part of the airborne payload weight. Xingkai’s quotation identifies the supplied items; use the complete platform-mounted assembly, with movement clearance, for your payload assessment.
Compare Related Models
Compact 120 × 81 × 123 mm EO/IR gimbal with 640 × 480 thermal imaging.
Request a Configuration Quote for XK-F515RS
Tell Xingkai the required XK-F515RS quantity, intended viewing area and ground viewing/control equipment. Include the available power supply and any accessory or operating-range requirement. Xingkai will check the selected lens and camera configuration, then provide a quotation identifying the equipment and agreed supply scope.