XK-F510RS 20× Starlight IP Gimbal Camera
XK-F510RS provides a 20× optical-zoom daylight camera with a 1/1.8-inch 2 MP starlight CMOS sensor on a three-axis gimbal. RTSP output and local TF recording support network viewing and onboard video storage. Xingkai checks the configuration for your camera and control system before quoting.
- Starlight CMOS imaging suits projects that need a low-light visible-camera channel.
- 20× optical zoom changes the visible field of view without changing the camera assembly.
- 1080p at 30 fps RTSP output supports network viewing, with local TF recording at the camera.
- IP or UART control and a 108 × 154 × 145 mm assembly give defined interface and installation choices.
XK-F510RS 20× Starlight IP Gimbal Camera Overview
XK-F510RS is a visible-light observation payload for projects that need zoom and network video in a three-axis camera assembly. Its 1/1.8-inch 2 MP CMOS sensor is specified for starlight imaging, and the camera has 20× optical zoom. This makes it a relevant choice when the required image is a low-light visible view rather than a separate thermal channel.
The camera sends 1080p at 30 fps through RTSP and supports local TF recording. IP and UART control allow the host to direct the gimbal and camera functions. Xingkai checks the model configuration against your requirements, then quotes the selected equipment and quantity. Confirm the control route and accessories with the order so the supplied camera matches the planned installation.
Technical Specifications
| Parameter | Configuration |
|---|---|
| Imaging channel | Visible-light starlight CMOS |
| Daylight sensor | 1/1.8-inch, 2 MP CMOS |
| Optical zoom | 20× |
| Video output | RTSP IP video, 1080p at 30 fps; local TF recording |
| Control | IP or UART |
| Power supply | 3S or 6S |
| Power consumption | 8 W |
| Dimensions | 108 × 154 × 145 mm |
| Device weight | 700 ±10 g |
Connections and Integration
The camera uses RTSP for network video, with IP or UART commands for control. The camera uses a 3S or 6S supply, consumes 8 W and weighs 700 ±10 g.
Specify the host video and control equipment when requesting a quotation so Xingkai can check the camera configuration and supply scope. Gimbal speed is adjustable, allowing slower direction changes at high zoom and faster movement at wider views.
Specify the F510RS Viewing and Operator Controls
Configure F510RS for the low-light visible view and zoom operation needed by your equipment. The quotation identifies the 20× starlight camera, RTSP receiving path, selected IP or UART control and accessory scope; local TF recording requirements are included when specified.
Send the scene and available illumination, ground display/control equipment and any existing video link. State the IP or UART control requirement, recording needs, 3S or 6S supply arrangement and camera quantity.
Xingkai checks the RTSP 1080p30 video path and selected host-command route for the 20× camera, then quotes the camera configuration and agreed connecting, mounting and recording accessories.
Agree the host control route and required zoom/gimbal operations, supplied leads and storage-card scope. Check the 108 × 154 × 145 mm, 700 ±10 g camera and 8 W load against the installation, then confirm quantities and delivery terms.
Xingkai supplies and ships the agreed F510RS configuration and listed accessories according to the confirmed order.
FAQs
Starlight describes a low-light visible-camera configuration. This model’s description does not establish a zero-light imaging guarantee or a thermal channel. If the task must work without visible illumination, describe that condition when requesting a camera configuration. Xingkai checks the model choice against the requirement before quoting the equipment for your observation system.
The gimbal supports one-click return to its initial position. This gives the operator a defined way to return the camera after changing the viewing direction. Specify how that command will be used through the selected IP or UART control arrangement with your host. The return function identifies a camera operation; it does not establish automatic object tracking or route-following behaviour.
Identify where the ground software receives the 1080p30 RTSP stream and how its commands reach the camera. If IP control is selected, include the return network path in the proposed arrangement; if UART is selected, identify that separate command connection and cabling. Ask for the quotation to distinguish video transport from the chosen control route, including any separately required equipment. A link that only accepts an HDMI or analog camera feed is not established as the RTSP transport path.
The camera supports local TF recording. That capability does not specify the storage card included in your order or its capacity. Include any required storage card with the camera and accessory quantities in your request. Xingkai checks the configuration and quotes the agreed items, which are confirmed with the delivery terms before supply.
F510RS lists adjustable gimbal speed and recommends slower movement at high zoom, but that does not establish automatic speed changes linked to zoom position. Specify whether the operator will select speed through the chosen IP/UART control arrangement or whether the host requires an automatic behaviour. The latter needs a separately confirmed control configuration. This keeps a useful high-zoom operating adjustment from being mistaken for an undocumented software function.
Compare Related Models
Compact 120 × 81 × 123 mm EO/IR gimbal with 640 × 480 thermal imaging.
Request a Configuration Quote for XK-F510RS
Tell us the platform, host video and control equipment, required camera configuration and quantities for XK-F510RS. Include the available power supply, low-light viewing task and any mounting or recording accessories required. Xingkai will check the model configuration and provide a quotation for the agreed supply scope.