XK-F516RS 30× Wireless Gimbal Camera
XK-F516RS combines a 30× optical-zoom camera with a three-axis gimbal and 2.4 GHz wireless video and control. The ground PAD workflow brings viewing and joystick control together. Xingkai checks the camera configuration and the ground equipment required for your quotation.
- 30× optical zoom provides a closer visible view from the selected camera position.
- 2.4 GHz wireless video and control suit a ground PAD viewing and control workflow.
- 1080p at 30 fps video and local TF recording support live viewing and camera-side storage.
- 745 ±10 g and 103 × 156 × 155 mm define the camera assembly for your platform assessment.
XK-F516RS 30× Wireless Gimbal Camera Overview
XK-F516RS is a visible-light camera payload for projects that want the operator to view video and direct the gimbal from a ground PAD. Its three-axis stabilized assembly carries a 4 MP CMOS camera with 30× optical zoom. The 2.4 GHz wireless arrangement carries video and control, while the PAD interface uses joysticks and buttons.
The camera supplies 1080p at 30 fps video and supports local TF recording. Its optical zoom and adjustable gimbal speed support changing between a wide view and closer observation. Xingkai checks the model configuration and the ground equipment requested for your project, then quotes the agreed camera, accessories and quantities. Confirm that equipment list and the delivery terms before ordering.
Technical Specifications
| Parameter | Configuration |
|---|---|
| Daylight sensor | 1/3-inch, 4 MP CMOS |
| Optical zoom | 30× |
| Video mode | 1080p at 30 fps |
| Video/recording | Wireless video; local TF recording |
| Wireless frequency | 2.4 GHz |
| Command mode | Joystick and button |
| Power supply | 3S or 6S |
| Power consumption | 8 W |
| Dimensions | 103 × 156 × 155 mm |
| Device weight | 745 ±10 g |
Connections and Integration
Identify the ground PAD and wireless equipment required with the camera when requesting a quotation. The camera’s 2.4 GHz video and control workflow uses joystick and button operation, while local TF recording stores video at the payload. Its power entry is 3S or 6S, with 8 W consumption.
Xingkai checks the model configuration and quotes the agreed supply scope; the gallery alone does not specify which accessories are included.
Configure the F516RS 30× PAD Workflow
Specify F516RS around the live views and camera operations required at the ground PAD. The quotation identifies the 30× camera, selected 2.4 GHz receiving/control equipment and accessories, with local recording and platform installation requirements included in the agreed scope.
Send the observation scene, required viewing distance and ground PAD/controller details. State the zoom and gimbal operations needed, any equipment to retain, 3S or 6S supply, mounting allowance, recording needs and quantity.
Xingkai checks the 30× camera and proposed 2.4 GHz video/control arrangement against the requested ground equipment, then quotes the camera and specified receiving/control, antenna and accessory scope.
Agree the camera/ground-unit configuration, joystick/button operations and supplied accessories. Confirm the 103 × 156 × 155 mm, 745 ±10 g camera installation and 8 W load, then agree quantities and delivery terms.
Xingkai supplies and ships the agreed F516RS camera/PAD configuration and listed accessories according to the confirmed order.
FAQs
The camera’s specified operating range is −10 to +45 °C and 20–80% relative humidity. Compare your installation conditions with that range when selecting the payload. Those entries do not define a waterproof rating or protection against condensation. Include exposure to rain or other environmental requirements with the configuration request before the camera and accessories are agreed.
Mark the positions where the operator needs a wide view and those where closer observation is required. Include the proposed PAD location, antenna arrangement and heights, obstructions and whether gimbal/zoom commands must remain available throughout the route. These define the task for the 2.4 GHz camera-and-ground-equipment proposal. Agree any live-picture and command-response acceptance requirements for that arrangement; the 30× optical specification or a distance number alone does not establish wireless coverage.
Identify camera viewing and pan/tilt/zoom commands separately from the vehicle’s RC functions. Send the existing controller’s model, versions, supported camera-control interfaces or protocol information, and associated video receiver. Ask the quotation to state which existing equipment can be retained for the proposed F516RS arrangement and which ground viewing/control items are required. The described joystick/button PAD workflow does not establish that every 2.4 GHz RC controller carries its video or commands.
Local TF recording and wireless viewing are separate parts of the camera workflow. A local recording specification does not establish the quality or delay of the complete wireless path at your site. Describe the viewing equipment and operating conditions with the inquiry, and identify any acceptance requirement alongside the selected camera and ground-equipment configuration.
The specified yaw range is −150° to +150°, with pitch from −90° to +90° and roll from −85° to +85°. Allow for those movements when choosing the camera position and mounting orientation. These entries describe the gimbal’s travel; they do not establish clearance from your airframe or cable layout. Include the intended viewing directions and mounting arrangement when the configuration is checked.
Compare Related Models
Compact 120 × 81 × 123 mm EO/IR gimbal with 640 × 480 thermal imaging.
Request a Configuration Quote for XK-F516RS
Tell us the platform, host video and control equipment, required camera configuration and quantities for XK-F516RS. Include the available power supply, wireless operating conditions and the ground viewing and control equipment you need. Xingkai will check the model configuration and provide a quotation for the agreed supply scope.