XK-M505E Airborne MIMO Mesh Radio
Build an airborne IP-video and data node around the XK-M505E’s two 10 W RF branches. The listed black enclosure combines defined mounting dimensions with Ethernet and serial-interface choices, allowing the radio and its connection arrangement to be specified together.
- 10 W × 2 RF output with transmission-power control for the selected radio configuration.
- 125 × 115 × 46 mm enclosure and ≤785 g listed radio weight for aircraft installation and payload allocation.
- Ethernet 100/1000Base-T in the listed port options connects compatible IP-video and data equipment.
- Four mounting holes and an 18–32 V DC input define practical installation requirements before an order is placed.
Appearance reference from the XK-M505E gallery; supplied dimensions and connections are specified in the quotation.
XK-M505E Airborne MIMO Mesh Radio Overview
XK-M505E is a dual-10 W airborne mesh radio for companies assembling a networked video or data link. Its Ethernet path carries IP traffic, while the selected serial connection carries compatible terminal data. The black enclosure’s 125 × 115 × 46 mm dimensions and ≤785 g device weight make it possible to compare the radio with the available tray space and payload allocation.
The listed configuration uses an 18–32 V DC input. Its operating-current requirement must be stated for the supplied configuration before the power supply is selected; RF output is not a DC-load rating. Xingkai identifies the radio, interface arrangement and accessories in the quotation, so the selected ports and mounting hardware can be planned as one installation scope.
Technical Specifications
| Parameter | Listed configuration |
|---|---|
| RF output | 10 W × 2; transmission-power control supported |
| DC input | 18–32 V; listed 10 W × 2 configuration |
| Enclosure dimensions | 125 × 115 × 46 mm; airborne black configuration |
| Radio weight | ≤785 g; airborne black configuration |
| Installation | 4 mounting holes |
| RF connections | 2 × TNC |
| Ethernet options | 1–3 × RJ45, 100/1000Base-T; port arrangement specified for the order |
| Serial/control options | RS232 or TTL UART; SBUS/Bluetooth arrangement specified for the order |
| Channel bandwidth options | 1.25 / 2.5 / 5 / 10 / 20 MHz |
| Waveform | Mobile Network MIMO (MN-MIMO) |
| Network layouts | Point-to-point, multipoint and multi-hop relay |
| Management | Web-based GUI; API/SNMP interface |
Connections and Integration
Specify one M505E port arrangement: the listed menu covers 1–3 RJ45 connections, RS232/TTL UART and SBUS/Bluetooth options. Identify the terminals so Xingkai can confirm the selected ports and harnesses together, rather than treating every option as fitted.
For the black 10 W × 2, 18–32 V configuration, obtain its applicable electrical-load specification before selecting the supply. Xingkai checks that power arrangement with the interface and antenna scope for the quotation. Keep any separate video-interface equipment identified as an additional item.
Appearance reference from the XK-M505E gallery; supplied dimensions and connections are specified in the quotation.
Configure and Order Your Mesh Nodes
Xingkai uses the node roles, terminal interfaces and available supply to identify the radio configuration and accessories for the quotation. Confirm the supplied scope, quantities and delivery terms before ordering.
Request the black 10 W × 2 M505E configuration and provide the available 18–32 V supply, required RJ45 count, serial levels, SBUS/Bluetooth requirements and radio quantities. Identify any customer-owned connection equipment.
Xingkai checks one M505E hardware and interface version, obtains its applicable electrical-load information and quotes the radio, antennas and harnesses. Confirm that load before accepting the power arrangement; the equipment list identifies the selected ports and supplied accessories together.
Agree on the configuration, quantities and delivery terms.
Xingkai supplies and ships according to the confirmed order.
FAQs
Only after comparing the quoted input range and electrical load. Two radios with the same RF-output rating can have different supply requirements. Provide the available supply specification; the operating-current requirement for the proposed XK-M505E configuration should be identified before that supply is accepted.
Request a list naming the radio’s supplied RJ45 count and serial/control connections, each terminal harness, RF leads, mounting parts and any separate video interface. Mark customer-owned items and identify which pieces will be carried on the aircraft. Obtain the weight basis for those supplied assemblies before using the list for payload planning. The ≤785 g device entry is not a measured total for every port and accessory combination.
State that simultaneous requirement before choosing the M505E configuration. The listing gives 1–3 RJ45 options and an SBUS/Bluetooth arrangement, not confirmation that every supplied version has your complete combination. Request a port list showing all three network-terminal connections and the SBUS path for one hardware version, with any extra connecting equipment identified. Do not buy a one-port configuration on the assumption that unused serial options provide additional Ethernet connections.
A related model name does not establish a compatible mixed network. Include the installed models, firmware versions and operating settings. Xingkai needs the proposed network configuration when identifying the supplied units; RF-output differences alone are not a pairing test.
That depends on the node roles. A simple link uses a radio at each end; a mesh layout can include several terminal and relay nodes. State the locations and quantities by role, and list the required accessories, so the quotation covers the network you intend to build.
Compare Related Models
Airborne mesh-radio configuration with two 2 W RF branches; compare its installation and supply requirements.
Airborne mesh-radio configuration with two 5 W RF branches for a different output and integration choice.
Airborne MIMO mesh radio in the two-10 W output class; compare the enclosure and connection arrangement.
Black-enclosure appearance reference; this image does not show the grey 635 g catalogue configuration.
Airborne MIMO mesh radio in the two-20 W output class; compare the installation and power requirement.
Black-enclosure appearance reference; the supplied enclosure and weight are confirmed in the quotation.
Request a Configuration Quote for XK-M505E
Send the payload allowance, mounting-space limits, terminal interfaces and proposed node quantities. Xingkai will identify the XK-M505E configuration and accessories for a project quotation.