XK-F366 Vehicle MIMO Mesh Radio
Appearance reference; the supplied hardware configuration is confirmed in the quotation.
Connect vehicle-mounted video and data terminals through an XK-F366 MIMO mesh node. Its two 10 W RF branches and vehicle enclosure provide a radio option for projects that need Ethernet traffic and serial equipment on a mobile network.
- 18–32 V DC input for the listed vehicle configuration; size the supply using the operating-current rating.
- 173 × 157 × 64 mm enclosure and 1.99 kg radio weight for planning the mounting space.
- Point-to-point, multipoint and relay layouts let the radio participate in the network arrangement selected for your project.
- Xingkai specifies the radio configuration and accessories, then quotes the required node quantities.
XK-F366 Vehicle MIMO Mesh Radio Overview
XK-F366 gives vehicle-based network terminals a mobile MIMO mesh connection, with two 10 W RF branches in the listed enclosure. Ethernet and serial connections bring different terminal types onto the radio network; the required interface arrangement belongs in the supplied configuration.
The 18–32 V DC input range and operating-current entry are useful when matching the radio to a vehicle power system. The enclosure dimensions describe the radio rather than an installed kit, so antenna placement and cable routing remain part of the integration layout. Compared with XK-F367, the operating-current requirement and its test voltage differ, so include the vehicle supply in the model comparison rather than selecting on RF power alone.
Technical Specifications
| Parameter | Listed configuration |
|---|---|
| RF output | 10 W × 2; listed vehicle configuration |
| DC input | 18–32 V |
| Operating current | 3–6 A at 18 V |
| Standby current | 0.7–0.9 A at 18 V |
| Enclosure dimensions | 173 × 157 × 64 mm |
| Radio weight | 1.99 kg; listed vehicle configuration |
| RF connections | 2 × TNC |
| Network interface | Ethernet; port and cable arrangement specified with the configuration |
| Network layouts | Point-to-point, point-to-multipoint, multipoint-to-multipoint and automatic relay |
Connections and Integration
Appearance reference; the supplied hardware configuration is confirmed in the quotation.
Plan the F366 vehicle installation around its 18–32 V DC input and listed 3–6 A operating load at 18 V. Identify whether the node uses the vehicle’s main cable or a specified battery arrangement, allowing separately for powered terminals.
Ethernet serves network video and data; serial terminals need their electrical levels and cables identified. Xingkai checks the supply, terminal connections and required PTT/video accessories for the quotation, so the vehicle installation has a defined power route and equipment scope.
Configure and Order Your Mesh Nodes
Describe each vehicle node and the terminals it must connect. Xingkai uses the available DC supply, required frequency configuration and node quantities to specify the radios and accessories in a quotation.
Confirm the supplied configuration, quantities and delivery terms before ordering. Xingkai supplies and dispatches according to the agreed order.
For each 10 W × 2 F366 vehicle node, send the available supply specification, main-cable or battery requirement, Ethernet and serial terminals, antenna arrangement and quantities. Identify any voice/PTT equipment needed.
Xingkai checks the F366’s 18–32 V input and 3–6 A at 18 V reference against the proposed supply, then quotes the vehicle-radio version, terminal cables and agreed power and antenna accessories. The configuration identifies which supply components accompany the radio.
Agree on the configuration, quantities and delivery terms.
Xingkai supplies and ships according to the confirmed order.
FAQs
No. Provide the voltage range delivered at the radio under the vehicle’s operating conditions, together with the other loads sharing that supply and the proposed cable route. The selected F366 input reference is 18–32 V; a nominal battery label does not establish the voltage at the connector. Have the connection and power arrangement specified before deciding on a direct vehicle feed or a separately supplied power arrangement.
No. Request the hole layout and cable-exit clearances for the F366 enclosure being supplied, and identify whether the bracket is customer-supplied or required in the quotation. The 173 × 157 × 64 mm and 1.99 kg entries describe the listed vehicle radio, not an installed bracket assembly. Use the agreed drawing and mounting-parts scope before drilling a vehicle support or ordering a bracket.
HDMI video is not an Ethernet data signal. Identify the camera output and any existing encoder so Xingkai can specify the network-video connection. Optional video-interface equipment must be listed separately; an IP mesh link alone does not establish a built-in HDMI encoder.
Provide the existing radio's exact model, hardware and firmware versions, frequency configuration and network settings. Matching a frequency or a connector does not establish network compatibility. Xingkai checks the proposed replacement configuration before identifying the supplied unit.
List the radio nodes by installation role and state how many vehicles or fixed locations need them. List the accessories separately. Xingkai can then quote the node quantities and supplied accessories without treating one radio as an entire multi-node network.
Compare Related Models
Vehicle mesh radio with two 20 W RF branches; compare the 18–32 V DC configuration and its electrical load.
Appearance reference; the supplied hardware configuration is confirmed in the quotation.
Mesh video and data radio with Ethernet, UART and SBUS interfaces for different terminal connections.
Compare XK-M372 for projects considering a 5 GHz network node.
Interface detail shown for reference. The pictured label is not a power specification for the supplied configuration.
Backpack mesh-radio form for projects considering a portable node rather than a vehicle installation.
Request a Configuration Quote for XK-F366
Send your vehicle-node quantities, terminal interfaces, available DC supply and proposed antenna arrangement. Xingkai will check the XK-F366 configuration and quote the radio units and accessories.