XK-F359 Airborne MIMO Mesh Radio
XK-F359 supplies a 20 W × 2 airborne MIMO mesh node for projects carrying network and serial data between mobile equipment. Direct and relay layouts let companies specify the radio around the positions of their aircraft, ground equipment and intermediate nodes.
- 20 W × 2 RF output gives a defined airborne power configuration to assess against the project requirements.
- Distributed mesh and multi-hop relay support networks with intermediate radio nodes.
- Ethernet and UART connections serve network payloads and serial terminals in the specified connection arrangement.
- Network management provides radio settings and topology monitoring for configuration and operation.
XK-F359 Airborne MIMO Mesh Radio Overview
XK-F359 is a 20 W × 2 airborne MIMO mesh radio for companies connecting payload traffic and serial equipment across mobile nodes. Its direct, point-to-multipoint and mesh relay modes give different ways to arrange the air and ground equipment within the proposed network.
The listed device dimensions are 127 × 110 × 33 mm. This provides a starting point for checking installation space, while the transmitter’s RF-output rating identifies the radio power configuration. Assess that configuration with the antenna arrangement and communication task; a higher RF rating alone does not demonstrate that it is the best fit for every aircraft or link.
Xingkai checks the terminal connections and intended layout, then quotes the radio units and accessories required for the proposed configuration. Confirm the supplied version, power arrangement and connection harness before finalising the platform installation or ordering additional nodes.
Technical Specifications
Listed airborne configuration. The quotation identifies the supplied version and connection accessories.
| Parameter | Listed configuration |
|---|---|
| Product form | Airborne MIMO mesh radio |
| RF output | 20 W × 2 |
| Listed device dimensions | 127 × 110 × 33 mm |
| Network layouts | Point-to-point, point-to-multipoint, mesh and multi-hop relay |
| Data connections | Ethernet and UART signal groups |
| Black connection configuration | DB25 power/communication connection; two RF channels |
| Management | Local/remote radio settings and network-topology monitoring |
Connections and Integration
The black XK-F359 connection record separates two RF channels from a DB25 power/communication connection carrying Ethernet and UART signal groups. The harness can be specified for the selected network payload and serial terminals.
Xingkai checks those terminals and the proposed node layout when preparing the quotation. Match the electrical levels and pin assignment to the supplied version; do not infer compatibility from the DB25 connector shape or a similar airborne model name.
Configure and Order Your Radio
Agree one F359 20 W × 2 enclosure and DB25 connection version. The quotation identifies its electrical specification and harness together, so an existing airborne installation is assessed against that assembly.
Send the band and node layout, network payloads, serial terminals, platform supply and radio quantities. Identify the selected F359 enclosure version and any customer-supplied terminal equipment that the quoted connections must serve.
Xingkai checks the 20 W × 2 version’s terminal levels, DB25 connections and applicable input specification, then quotes the radio units and accessories. The configuration identifies the supplied power and communication arrangement without treating another version’s electrical data as interchangeable.
Agree on the supplied configuration, quantities and delivery terms before proceeding.
Xingkai supplies and ships according to the confirmed order.
FAQs
Check the complete supplied version before treating it as a replacement. The RF-output rating does not establish the same electrical load, cable pin assignment, enclosure or mounting arrangement as another radio. Provide the existing unit and installation details. Xingkai checks the proposed configuration and connection accessories so the replacement is assessed against the actual platform.
Provide the number of active sources and the data required from each, together with the intended node and relay layout. A general radio-rate entry is not a guarantee that every source can transmit simultaneously over every route. Xingkai uses the required traffic and layout when checking the proposed configuration and quantities for the quotation.
Mesh operation does not establish a guaranteed link through every obstruction. The path, node positions, antennas, frequency and traffic requirements remain part of the assessment. Describe the deployment and any available relay positions when requesting the configuration. Xingkai checks the proposed arrangement rather than treating a non-line-of-sight product description as a guarantee for the site.
A shared brand or frequency label does not establish interoperability. Supply the model suffixes, hardware and firmware versions and intended network settings for the units you want to combine. Xingkai checks the proposed configuration before quoting. Confirm operation for the selected devices rather than assuming that all airborne models use interchangeable radio and security settings.
The black F359 record shows two UART groups and marks a 5 V connection within UART0, but gives no allowable auxiliary load. Tell Xingkai whether the terminal needs harness power or has its own supply, and provide its voltage and current requirement. Request the permitted terminal load and supply routing for the selected version before choosing the powered branch. A 5 V marking is not a terminal power-budget guarantee.
Compare Related Models
2 W × 2 airborne MIMO mesh radio for network and serial equipment.
Black enclosure reference; supplied version is specified in the quotation.
5 W × 2 airborne MIMO mesh radio with listed 120 × 63 × 30 mm dimensions.
Airborne configuration with Ethernet, serial and SBUS control connections.
Exterior reference; supplied interfaces are specified in the quotation.
Airborne mesh radio with listed 110 × 96 × 21 mm dimensions and 231 g device weight.
Request a Configuration Quote for XK-F359
Tell us which equipment and nodes your XK-F359 network needs to connect. Include the operating band, terminal interfaces, power arrangement and required radio quantities. Xingkai will check the configuration and provide a quotation identifying the radio units and accessories.