XK-F355 Airborne MIMO Mesh Radio
XK-F355 connects airborne network and serial equipment through a 2 W × 2 MIMO mesh radio. Its centreless network supports relay layouts as well as direct links, giving an integrator a node for a multi-platform communication system.
- 2 W × 2 RF output identifies the airborne power configuration for the proposed network.
- Point-to-point, point-to-multipoint and mesh relay modes support direct links and networks with intermediate nodes.
- The listed airborne dimensions are 110 × 62 × 20 mm with a 160 g device-weight entry for installation comparison.
- Ethernet and UART signal groups connect network payloads and serial terminals through the specified harness arrangement.
Black XK-F355 enclosure reference. The listed airborne dimensions and weight are a separate catalogue entry; supplied enclosure and connections are specified in the quotation.
XK-F355 Airborne MIMO Mesh Radio Overview
XK-F355 is an airborne MIMO mesh radio for companies connecting IP equipment and serial terminals across mobile nodes. The distributed network supports direct connections and multi-hop relay, so the selected topology can follow the placement of your air and ground equipment.
The listed airborne configuration measures 110 × 62 × 20 mm and has a 160 g device-weight entry. These values give a starting point for installation-space and weight comparisons. Antennas, cables and mounting components add to the installed assembly, while the RF-output figure describes the transmitter rather than the electrical input load.
Xingkai specifies the radio and accessories around the project requirements. The quotation identifies the supplied configuration, units and connection accessories. Confirm the power and harness arrangement for that version before ordering or reusing an existing platform cable.
Technical Specifications
Listed airborne dimensions and device weight. The supplied enclosure and connection version are specified in the quotation.
| Parameter | Listed configuration |
|---|---|
| RF output | 2 W × 2; airborne configuration |
| Listed airborne dimensions | 110 × 62 × 20 mm |
| Listed device weight | 160 g; device entry |
| Networking | Point-to-point; point-to-multipoint; mesh and automatic relay |
| Black connection configuration | DB15 power/communication connection |
| Data connections | Ethernet and UART signal groups through the connection harness |
Connections and Integration
Black XK-F355 DB15 configuration shown; supplied enclosure and connections are specified in the quotation.
The black XK-F355 connection record uses a DB15 power/communication connector with Ethernet and two UART signal groups, plus two RF connections. This lets network payloads and serial devices connect through a defined harness arrangement.
Xingkai checks the terminal connections when specifying the radio and cable configuration. Match the DB15 harness to this version before connecting power; a connector that fits mechanically does not establish its pin assignment.
Configure and Order Your Radio
Specify the F355 2 W × 2 radio, its enclosure and connection version for one quotation. The 110 × 62 × 20 mm / 160 g catalogue entry is a mechanical reference; the black DB15 record describes a connection version, not proof of the same assembled enclosure.
Send the operating band and node layout, the intended enclosure, Ethernet and two-UART terminal requirements, available DC supply and radio quantities. For the black DB15 connection version, include any existing harness drawing.
Xingkai checks the selected F355 enclosure, DB15 harness and terminal signals against that version’s power specification, then quotes the radio units and connection accessories. The quotation identifies the supplied mechanical and connection arrangement for installation confirmation.
Agree on the supplied configuration, quantities and delivery terms before proceeding.
Xingkai supplies and ships according to the confirmed order.
FAQs
Do not assume that from the connector drawing. The black F355 DB15 record separates the DC input, Ethernet and two UART groups, and marks a 5 V connection within UART0; it does not state an allowable auxiliary load. If a terminal needs power through the harness, provide its voltage and current requirement and request the permitted load and supply routing for the quoted version. Have that rating confirmed before choosing harness power instead of a separate terminal supply.
No. The 2 W × 2 figure is RF output. For the SDR catalogue’s 2 W × 2 airborne entry, input is listed as 12–36 V DC and operating current as 1–2 A at 12 V. Use that entry only for the corresponding configuration; the black DB15 drawing alone does not establish its input rating. Have the quoted enclosure’s electrical specification identified before selecting a supply, allowing separately for any terminal equipment powered from it.
Use the enclosure and connection information specified for the order. An airborne device entry does not establish that every enclosure or hardware version has identical dimensions, weight or cable clearances. If the radio must fit an existing tray or cut-out, include that drawing in the enquiry so the proposed radio arrangement can be checked.
It does not establish a direct HDMI input or an included encoder. Network video can be carried as IP traffic, while HDMI or SDI sources may require separate interface equipment. Send the camera output type and required video task. The quotation should identify any video-interface equipment separately from the radio units and antennas.
A shared frequency or MIMO label is not enough to establish pairing. Provide the installed radios’ model suffixes, hardware and firmware versions, network settings and frequency configuration. Xingkai checks the proposed radio configuration before quoting. Cross-brand operation and mixed-version interoperability need verification for the specific system; they are not assumed from the model family name.
Compare Related Models
5 W × 2 airborne MIMO mesh radio with listed 120 × 63 × 30 mm dimensions.
Airborne configuration with Ethernet, serial and SBUS control connections.
Exterior reference; supplied interfaces are specified in the quotation.
Airborne mesh radio with listed 110 × 96 × 21 mm dimensions and 231 g device weight.
Request a Configuration Quote for XK-F355
Tell us which equipment and nodes your XK-F355 network needs to connect. Include the operating band, terminal interfaces, power arrangement and required radio quantities. Xingkai will check the configuration and provide a quotation identifying the radio units and accessories.