XK-F603RS 30× EO/IR IP Gimbal Camera
XK-F603RS combines a 30× optical-zoom daylight camera with a choice of 384 × 288 or 640 × 480 thermal imaging on a three-axis gimbal. RTSP network video supports viewing through an IP video system, with picture-in-picture display in the ground software. Xingkai checks the detector, lens and control configuration before quoting the selected payload.
- 30× daylight optical zoom supports closer visible observation from the camera position.
- 384 × 288 and 640 × 480 thermal configurations let the order identify the detector required for the project.
- RTSP IP output and ground-software picture-in-picture viewing bring daylight and thermal images into the viewing workflow.
- Local TF recording and a three-axis FOC gimbal support camera-side storage and steerable observation.
XK-F603RS EO/IR IP Gimbal Camera Overview
XK-F603RS is an EO/IR payload for companies selecting daylight detail and thermal observation in one steerable assembly. Its model specification pairs a 4 MP daylight sensor and 30× lens with a selected thermal detector. The operator can compare the two views in the ground software and change the thermal palette when observing heat patterns.
The network video path suits an RTSP receiving system. Xingkai checks which detector resolution, lens and control connection the project needs, then quotes that configuration and its agreed accessories. The supplied control interface is identified with the order; the listed control configurations should not be treated as a promise that every connection is fitted together.
Technical Specifications
| Parameter | Configuration |
|---|---|
| Daylight sensor | 1/3-inch, 4 MP CMOS |
| Optical zoom | 30× |
| Daylight focal-length range | 4.5 ±10% to 135 ±10% mm |
| Thermal detector resolution | 384 × 288 or 640 × 480; select the ordered configuration |
| Thermal pixel pitch | 17 μm |
| Spectral band | 8–14 μm |
| Thermal sensitivity (NETD) | ≤65 mK at 30 °C |
| Video output and recording | RTSP IP video at 1080p; local TF recording |
| Video mode | 1080p at 30 fps |
| Listed control configurations | IP, SBUS and UART; supplied control interface specified in quotation |
| Power supply | 3S or 6S |
| Power consumption | 7.5 W in dynamic operation |
| Pitch travel | −90° to +90° |
| Roll travel | −85° to +85° |
| Yaw travel | −150° to +150° |
| Dimensions | 158 × 125 × 185 mm |
| Device weight | 940 ±10 g |
Connections and Integration
Use a receiving system that accepts the camera’s RTSP IP video. IP, SBUS and UART control are listed for this model; request PWM explicitly if it is required.
Xingkai identifies the supplied control connection in the quotation, rather than assuming all of these are fitted together. Specify the receiving and control equipment to be retained, together with the selected thermal detector.
The power entry is 3S or 6S, with 7.5 W consumption in dynamic operation.
Specify the F603RS Detector, Lens and Host Controls
The F603RS quotation identifies the selected 384 × 288 or 640 × 480 thermal detector and lens alongside the 30× daylight camera. Agree the RTSP receiving/PIP arrangement and one supplied control configuration, with measurement and recording requirements separately stated for the order.
Send the thermal resolution and viewing area/distance, host RTSP receiving equipment and required camera operations. State the preferred IP, SBUS or UART route—or request PWM explicitly—with any measurement requirement, supply, mounting allowance and quantity.
Xingkai checks the selected detector/lens, RTSP 1080p receiving path and required control connection, then quotes the camera configuration and agreed mounting, cabling and recording scope. Any requested measurement option is identified separately.
Agree the thermal detector/lens and the actual supplied control interface with the accessory list. Confirm the 158 × 125 × 185 mm, 940 ±10 g assembly, 3S or 6S supply and 7.5 W dynamic load fit the installation, then agree quantities and delivery terms.
Xingkai supplies and ships the agreed F603RS detector/control configuration and listed accessories according to the confirmed order.
FAQs
No. The model specification lists measurement as optional. If the project needs a centre-point reading, hottest/coldest-point display or an over-temperature alert, identify that requirement when requesting the configuration. The quotation should state which measurement function is supplied. A thermal image or colour palette alone does not establish measurement accuracy, calibration or acceptance against a temperature requirement.
Request PWM explicitly if that is the connection your host controller needs. Identify the controller and command connection so Xingkai can specify the supplied interface in the quotation. Do not assume that a unit quoted for an IP, SBUS or UART connection also provides the required PWM connection; connector assignment and cable scope belong to the selected order configuration.
Detector resolution alone does not define the viewing angle. The thermal lens and the supplied detector configuration need to be considered together. Describe the viewing area and observation distance when requesting 384 × 288 or 640 × 480 thermal imaging, and have the quotation identify the selected lens. Do not infer a lens or a field of view solely from the pixel count.
The stated operating conditions are −10 to +45 °C and 20–80% relative humidity. They do not establish an ingress-protection rating. Describe rain, spray, condensation or other exposure in the inquiry so the proposed equipment and order conditions address the installation. An EO/IR gimbal intended for aerial observation should not be assumed waterproof because of its application description.
The listed 940 ±10 g is the camera’s device weight. Mounts, cabling and any separate communication equipment add to the installed payload. Ask for the supplied equipment list with the quotation, then assess that assembly against your platform’s payload allowance and movement clearance. The model’s device-weight entry does not define the weight of an installation built around it.
Compare Related Models
Compact 120 × 81 × 123 mm EO/IR gimbal with 640 × 480 thermal imaging.
Request a Configuration Quote for XK-F603RS
Request XK-F603RS with the required thermal resolution, lens and control connection, plus the quantities and receiving-equipment details. Include any temperature-measurement or accessory requirement. Xingkai will check the selected configuration and provide a quotation for the agreed camera and supply scope.