XK-FA100 Electric Fixed-Wing VTOL Drone
XK-FA100 is an electric fixed-wing VTOL platform with a 2500 mm wingspan, GPS navigation and a recommended payload of ≤2.0 kg. It provides a defined platform choice for businesses configuring an imaging or data-collection aircraft.
- Electric vertical take-off and landing reduces reliance on a runway at the deployment site.
- 2500 mm wingspan and 1260 mm length define the aircraft envelope.
- Recommended payload ≤2.0 kg supports an initial mission-equipment review.
- GPS navigation and a recommended 70–90 km/h cruising-speed range describe the listed flight configuration.
XK-FA100 Electric Fixed-Wing VTOL Drone Overview
XK-FA100 combines electric propulsion, vertical take-off and landing and a fixed-wing layout. For a business planning an imaging or data-collection aircraft, the platform offers a way to assess fixed-wing operation while retaining vertical deployment.
The recommended payload is ≤2.0 kg and the listed maximum take-off weight is 13.5 kg. Review the camera, mounting parts and other installed equipment as a configuration, with batteries and control equipment identified separately. The recommended cruising-speed range is a selection reference, not proof of task completion or flight duration.
Xingkai checks the proposed mission equipment and aircraft configuration before quoting. Confirm the supplied platform, mission payload, ground equipment and accessories in the order.
Technical Specifications
| Parameter | Model reference |
|---|---|
| Aircraft type | Electric fixed-wing VTOL |
| Wingspan | 2500 mm |
| Length | 1260 mm |
| Maximum take-off weight | 13.5 kg |
| Recommended payload | ≤2.0 kg |
| Navigation mode | GPS navigation |
| Recommended cruising speed | 70–90 km/h |
| Power system | Brushless motor |
Configure the Imaging and Ground Equipment
XK-FA100 combines GPS navigation with an imaging configuration to be specified for the mission. Review the complete camera installation against the recommended ≤2.0 kg payload, including its attached hardware. GPS navigation does not establish the camera’s video or control connection.
The visible-light camera and dual-screen ground station are reference equipment. Xingkai checks the proposed airborne and ground arrangement and quotes the supplied items separately from customer-owned equipment, so you can select the imaging package without assuming the reference equipment is included.
Configure and Order Your Platform
The four stages below establish the supply scope for your electric VTOL platform and mission equipment.
Send the imaging task and installed payload weight for the FA100’s recommended ≤2.0 kg payload. Identify whether you need the reference visible-light camera and dual-screen ground station, any equipment you will retain, deployment conditions and quantities.
Xingkai checks the payload installation and proposed air-to-ground equipment arrangement, then quotes the aircraft, selected camera, ground station and accessories with quantities. Customer-owned items are distinguished from equipment to be supplied.
Agree the supplied configuration, item quantities and delivery terms with Xingkai.
Xingkai arranges supply and dispatch according to the confirmed order.
FAQs
Identify the camera as customer-supplied and send its exact model, mounting drawing, supply voltage and video and control interfaces. Include any encoder or controller you intend to retain. Xingkai can review the proposed arrangement and identify additional supplied equipment; using your own camera does not establish that the existing cables or ground equipment will also work unchanged.
Ask which displays, control equipment and video-receiving equipment are covered by the quoted FA100 ground-station item. If you intend to retain part of an existing station, identify those exact components separately. The dual-screen reference describes a display arrangement; it does not establish a receiver, control protocol or interchangeable equipment. Confirm those functions and component quantities before choosing a complete station or a partial replacement.
Provide the route and duration target with the complete installed load for review against the FA100’s recommended ≤2.0 kg payload. Identify the proposed battery package and ask for duration evidence under corresponding payload and operating conditions. If a proposal relies only on the unconditioned 2–3 hour reference, it does not establish completion of your route; have the configuration basis resolved before approving that mission.
List the camera or sensor, mount, cables and any other equipment that will be carried. Distinguish those items from the battery and other aircraft components. Xingkai reviews the proposed installation; do not rely on camera weight alone to establish that the entire configuration fits the platform requirement.
Identify whether you need packing for the aircraft, the ground station or both. FA100 lists a 2500 mm wingspan, a separate aircraft package reference and a separate ground-station size; these describe different transport items. Ask for the packed dimensions and item counts for the actual supplied configuration, including the required disassembly arrangement, before booking vehicle or freight space.
Compare Related Models
Request a Configuration Quote for XK-FA100
Send the imaging task, proposed payload and mounting, required ground equipment, deployment conditions and quantities for XK-FA100. Identify any equipment you will provide and the items you need supplied. Xingkai will check the proposed configuration and provide a quotation.