XK-F301E Wireless Video and Data Link
When mounting space and equipment weight influence radio selection, XK-F301E provides a compact link for video, telemetry and control data. Xingkai checks the configuration against your terminals, power supply and intended communication layout.
- Network, UART (TTL/RS232) and SBUS interfaces carry network data, serial data and remote-control traffic over the same wireless link.
- Choose a point-to-point or point-to-multipoint relay layout to match the equipment you need to connect.
- 8–30 V DC input, nominal 12 V; listed power consumption is ≤7 W at 25 dBm RF output for checking your platform’s power budget.
- 102 × 58 × 24 mm and device weight ≤130 g give you a defined footprint and equipment-weight figure for installation.
Frequency configuration and the required radio units and accessories are identified in your quotation.
XK-F301E Wireless Video and Data Link Overview
XK-F301E is a wireless video and data link for projects where the radio’s footprint and equipment weight matter. Its listed dimensions are 102 × 58 × 24 mm, with device weight ≤130 g, so you can compare it with the space and weight available on your platform.
The radio carries network, telemetry and control traffic through network, UART and SBUS connections. The listed 8–30 V DC input range, nominal 12 V supply and ≤7 W consumption at 25 dBm RF output give you specific electrical conditions to check alongside those connections.
Xingkai reviews the terminal interfaces, frequency requirement and communication layout, then specifies the units and accessories for your order. Confirm the supplied configuration, quantities and delivery terms together before proceeding.
Technical Specifications
Frequency entries describe configuration options, rather than simultaneous operation across all listed bands. The quotation specifies the supplied frequency configuration, units, antennas and cables; antenna gains below are reference entries.
| Parameter | Listed configuration |
|---|---|
| Frequency options | 800 MHz / 1.4 GHz / 2.4 GHz; configuration specified in quotation |
| RF output power | ≤25 dBm, adjustable |
| Power input | 8–30 V DC; nominal 12 V |
| Power consumption | ≤7 W at 25 dBm RF output |
| Radio dimensions | 102 × 58 × 24 mm |
| Device weight | ≤130 g |
| Antenna references | Air unit: 2.5 dBi; ground unit: 7 dBi |
| Channel bandwidth | 3 / 5 / 10 / 20 MHz |
| Modulation | OFDM |
| Data/control interfaces | UART (TTL/RS232), SBUS |
| Communication protocol | IEEE 802.3; transparent serial data |
| Link modes | Point-to-point; point-to-multipoint relay |
| Rated operating temperature | −30 to +60 °C |
| Rated storage temperature | −40 to +75 °C |
| Security and channel operation | AES128 encryption; adaptive frequency hopping |
Video, Telemetry and Control in a Compact Installation
On a space-limited platform, F301E takes network video, UART telemetry and SBUS remote-control data over one wireless link. At the ground end, the station exchanges data through serial or UDP/TCP network connections, keeping the camera, flight controller and station roles clear.
The 102 × 58 × 24 mm radio suits a compact equipment layout. Its nominal 12 V supply and 8–30 V DC input give you an electrical starting point alongside the network and control connections.
Specify the F301E Units and Frequency
Choose the F301E frequency configuration and the units needed at each end of the link. Xingkai’s quotation identifies the radio quantities, antennas and cables for that layout; additional video equipment is a separate item when required.
Send the available space and weight allowance, DC supply, camera output and flight-controller connections. State the required frequency and which platforms must exchange data.
Xingkai checks the 800 MHz, 1.4 GHz or 2.4 GHz requirement, UART electrical interface and link layout, then quotes the specified air and ground units, antennas and cables.
Agree the F301E frequency configuration, endpoint quantities and accessory list together with the delivery terms. Identify any separately required video equipment before confirming the order.
Xingkai supplies and ships the agreed F301E units and listed accessories according to the confirmed order.
FAQs
Start with the installed units’ labels and frequency settings: F301E is offered in 800 MHz, 1.4 GHz and 2.4 GHz configurations. Include the hardware and firmware versions, channel bandwidth and present link layout. Identify whether the new air unit replaces one endpoint or adds another. These details let Xingkai check the proposed counterpart and layout before quoting; the model name alone is insufficient.
The video must reach F301E as network data, so an HDMI camera needs a separately specified network-video encoding arrangement. Include that equipment when planning the installation: the radio’s 102 × 58 × 24 mm dimensions do not cover the encoder. Send the camera output details and available space so the radio and any additional video equipment can be scoped separately in the quotation.
Use ≤130 g for the radio entry, then add separate allowances for the selected air-side antenna, cables, mounting parts and any video encoder. The catalogue gives a 2.5 dBi air-side antenna reference but no complete assembly weight. Mark which parts are already on the aircraft and which the order must add; this produces an installation budget without counting existing equipment twice.
Check its lowest and highest voltage at the radio connection over the operating cycle. F301E lists an 8–30 V DC input; a nominal battery label does not describe both limits. The supply budget should also account for the listed ≤7 W condition at 25 dBm RF output and any separately powered video equipment. Include a regulator only if your electrical design requires one; it is not an assumed radio accessory.
Treat them as different connections. F301E lists UART in TTL or RS232 form for transparent serial data and a separate SBUS function for remote-control data. Identify the flight controller’s telemetry interface and its remote-control input independently. Transparent transport does not itself convert a serial message into SBUS or establish that the controller understands it; provide both interface details when choosing the cable arrangement.
Compare Related Models
Compare its listed 12–28 V input and 115 × 92 × 28 mm device when checking another configuration against your platform.
Compare its 20–28 V input, nominal 24 V supply and ≤32 W consumption at 40 dBm RF output with your available power.
Assess the listed 96 × 78 × 19 mm footprint and ≤190 g device weight alongside its terminal connections.
Check the air-unit and ground-unit power requirements for the specified hardware version when comparing an air-to-ground link.
Request a Configuration Quote for XK-F301E
Planning a compact air-side installation? Send the space and weight allowance and the frequency required for your F301E project. Xingkai will check the proposed configuration and quote its radio and accessory scope.