XK-F412RS 10× EO/IR IP Gimbal Camera
XK-F412RS combines a 10× optical-zoom daylight camera and a 320 × 240 thermal sensor on a three-axis gimbal. Its RTSP network output brings both imaging modes into an IP video workflow. Xingkai checks the camera configuration and supply scope against your platform before quoting.
- 10× daylight optical zoom gives the operator a closer view while the thermal channel supports heat-pattern observation.
- 1080p at 30 fps RTSP output connects the camera to a network video system.
- IP control and optional UART control provide two configuration routes for directing the gimbal.
- 145 × 110 × 145 mm and 580 ±20 g define the camera assembly to assess against your payload space.
XK-F412RS 10× EO/IR IP Gimbal Camera Overview
For a platform that needs daylight detail and thermal observation from one steerable payload, XK-F412RS brings the two cameras onto a three-axis FOC gimbal. The daylight channel uses a 4 MP CMOS sensor and 10× optical zoom; the thermal channel has 320 × 240 pixels. Ground-system picture-in-picture display and thermal palette switching support comparison of the views during observation.
The model outputs 1080p RTSP video and supports local TF recording. Its IP control route suits a network-based installation, while UART is an option to identify in the quotation. Xingkai checks the selected model configuration and quantities, then quotes the agreed equipment and accessories. This gives your team a defined supply scope before integrating the payload.
Technical Specifications
| Parameter | Configuration |
|---|---|
| Daylight sensor | 1/3-inch, 4 MP CMOS |
| Optical zoom | 10× |
| Thermal resolution | 320 × 240 |
| Thermal pixel pitch | 12 μm |
| Video output | RTSP IP video, 1080p at 30 fps; local TF recording |
| Control | Direct IP; UART option |
| Power supply | 3S or 6S; DC 12–26 V |
| Power consumption | Approximately 9 W |
| Dimensions | 145 × 110 × 145 mm |
| Device weight | 580 ±20 g |
Connections and Integration
RTSP video and direct IP control use the camera’s network connection. UART control is optional, so identify the control route with your host equipment when requesting a quotation. The published power entry is 3S or 6S, DC 12–26 V, at about 9 W.
Xingkai checks the selected configuration for your equipment; the quotation identifies the camera and any required accessories. A network connection alone does not establish a plug-in match to every video receiver.
Specify the F412RS Viewing and Control Arrangement
Configure F412RS around the 10× daylight and 320 × 240 thermal views your operator needs. The quotation identifies the camera, direct-IP or optional-UART control route and accessories, with ground-display and local-TF recording requirements addressed for the selected arrangement.
Send the ground video/control equipment, required daylight/thermal or picture-in-picture display, and any recording requirements. State the host control route, available DC supply, payload allowance and camera quantity.
Xingkai checks the RTSP 1080p30 receiving path, direct-IP or requested UART control and the proposed display/recording arrangement, then quotes the F412RS camera and specified connecting/accessory scope.
Agree the control route, supplied cables and any storage-card requirement. Confirm the 145 × 110 × 145 mm, 580 ±20 g camera installation and 12–26 V supply with approximately 9 W consumption, then agree quantities and delivery terms.
Xingkai supplies and ships the agreed F412RS configuration and listed accessories according to the confirmed order.
FAQs
A temperature display and thermal picture do not establish a calibrated measurement specification. Describe the temperature range, target material and accuracy required for your project when requesting XK-F412RS. Xingkai checks the model configuration for the quotation; any measurement requirement needs a corresponding specification before you rely on it for an acceptance decision.
Treat the display layout and recording result as separate requirements. F412RS lists ground-system picture-in-picture and local TF recording, but those entries do not define whether a saved file contains individual daylight/thermal views or the ground display’s combined picture. Specify which views must be retained and whether recording is required at the camera or ground equipment. Have the selected recording arrangement and media scope identified in the quotation instead of judging the saved evidence from the live screen alone.
State UART control explicitly in the quotation request because it is an option for XK-F412RS. Include the host model and the required command connection. Xingkai checks the requested configuration before quoting, and the order should identify the control route and cable scope. Do not infer a connector pinout or serial electrical level from the word UART.
The camera’s device-weight entry is 580 ±20 g. It does not define the total weight of your installation with mounts, wiring and any separate communication equipment. Identify those items in the supply request, and use the selected assembly and accessories when assessing the platform’s payload allowance before confirming the order.
The operating entry is −10 to +45 °C with 20–80% relative humidity. Compare the intended installation conditions with that range when specifying the camera. These temperature and humidity entries do not establish a waterproof rating or an enclosure test. If the payload faces rain, condensation or conditions outside the stated range, identify those requirements before confirming the equipment configuration.
Compare Related Models
Compact 120 × 81 × 123 mm EO/IR gimbal with 640 × 480 thermal imaging.
Request a Configuration Quote for XK-F412RS
Need daylight and thermal views in a network video workflow? Tell us whether the operator needs separate views or picture-in-picture, and identify the ground video/control equipment and camera quantity. Xingkai will check the F412RS arrangement and quote the camera and agreed connections.