XK-F305E Wireless Video and Data Link
For a platform with a 24 V supply, XK-F305E carries network video, telemetry and remote-control data through one wireless link. Xingkai checks the required interfaces and link arrangement before specifying the radio units and accessories.
- The listed 1.4 GHz configuration connects network traffic, UART data and SBUS control through the same wireless link.
- 20–28 V DC input, nominal 24 V, and consumption of ≤32 W at 40 dBm give the electrical conditions for selecting the platform supply.
- Adjustable RF output up to 40 dBm provides an output setting to assess with the intended antennas and deployment conditions.
- 125 × 120 × 30 mm and device weight of ≤470 g define the radio’s footprint and carried-equipment budget.
XK-F305E Wireless Video and Data Link Overview
XK-F305E is a video and data radio for connecting a platform and its ground equipment. Network traffic, telemetry, camera-control and remote-control data share the wireless link, with UART in TTL or RS232 form and SBUS available for the terminal connections.
The listed configuration uses a nominal 24 V supply within a 20–28 V DC input range. Consumption is ≤32 W at 40 dBm RF output. Use this electrical rating to assess the available power supply; the adjustable RF-output setting alone does not describe the load on the platform or establish its operating distance.
Xingkai specifies the radio units and accessories from the intended interfaces and link layout, then provides a quotation. Confirm the supplied frequency configuration and separate air-unit and ground-unit quantities, together with the accessory list and delivery terms, before ordering.
Technical Specifications
These entries describe the listed 1.4 GHz configuration. Antenna gains are references; the quotation identifies the actual radio units, antennas and cables supplied.
| Parameter | Listed configuration |
|---|---|
| Power input | 20–28 V DC; nominal 24 V |
| Power consumption | ≤32 W at 40 dBm RF output |
| RF output power | ≤40 dBm, adjustable |
| Frequency configuration | 1.4 GHz; configurable frequency specified in the quotation |
| Channel bandwidth | 3 / 5 / 10 / 20 MHz |
| Radio dimensions | 125 × 120 × 30 mm |
| Device weight | ≤470 g |
| Modulation | OFDM |
| Data/control interfaces | UART (TTL/RS232), SBUS |
| Communication protocol | IEEE 802.3; transparent serial data |
| Link modes | Point-to-point; point-to-multipoint relay |
| Antenna references | Air unit: 3.5 dBi; ground unit: 12 or 16 dBi |
| Rated operating temperature | −30 to +60 °C |
| Rated storage temperature | −40 to +75 °C |
| Security and channel operation | AES128 encryption; adaptive frequency hopping |
Connections and Integration
Use F305E’s network path for the camera stream, UART TTL/RS232 for the selected telemetry or payload terminal, and SBUS for remote-control data. These are distinct signal paths within the listed 1.4 GHz link; matching the serial electrical level lets the terminal wiring follow the equipment already on your platform.
The nominal 24 V configuration suits a 20–28 V supply, with ≤32 W consumption at 40 dBm. Allocate that radio load alongside the connected devices when planning the platform and ground installations.
Specify the F305E 24 V Link Configuration
Provide a platform-to-ground connection plan for the listed 1.4 GHz F305E. Xingkai identifies the selected bandwidth, UART electrical level and SBUS requirement, then quotes the radio roles, quantities and accessories around the available 20–28 V supplies.
Send the network camera or encoder, telemetry/control terminal details and required TTL, RS232 or SBUS paths. Include the video/data load, requested channel bandwidth, endpoint arrangement, actual supply range at each end and unit quantities.
Xingkai checks the 1.4 GHz configuration and 3/5/10/20 MHz bandwidth choice against the terminal and link requirements. The quotation identifies the radio configuration, selected electrical connections, antennas, cables and separately required interface equipment.
Confirm the nominal 24 V arrangement remains within 20–28 V DC and allows for ≤32 W radio consumption at 40 dBm. Agree endpoint roles, unit counts and accessories, with space for the 125 × 120 × 30 mm radio, then confirm delivery terms.
Xingkai supplies and ships the agreed F305E configuration, endpoint quantities and listed accessories according to the confirmed order.
FAQs
A 12 V supply is outside the listed 20–28 V DC input range. Provide the available supply details so Xingkai can check the proposed power arrangement. If a converter is required, identify it separately in the installation and supply scope; the radio specification does not establish that such a converter is built in or included with the ordered link.
Start with the air-side 3.5 dBi and ground-side 12 or 16 dBi references, then identify the proposed antennas and their mounting/coverage arrangement. Include platform movement, ground position, heights, obstructions and simultaneous video/data load. Have the actual antenna and cable configuration assessed with the selected RF setting up to 40 dBm. The 150 km entry does not identify those deployment conditions or establish which ground antenna suits your project.
The F305E configuration here already lists adjustable RF output up to 40 dBm, 20–28 V DC input and ≤32 W consumption at 40 dBm. The F305KE catalogue entry shares those ratings, so the suffix alone does not establish a higher-output choice. Specify the complete requested model and frequency configuration; for a retained radio, provide its versions and settings so the exact counterpart and accessory scope can be identified.
Use the F305E’s ≤470 g device entry as one component of the air-side assembly. Add the selected antenna, leads, mounting parts and any video encoder; identify existing parts that will remain. Compare that installed list with the alternative configuration rather than comparing RF output alone or adding ground equipment to the carried weight. Request component weights for the selected supply scope before committing the payload allowance.
The listed link carries IP video through its network connection. Provide the camera model and output type so Xingkai can check the network-video and encoding arrangement between the camera and radio. Any encoder or interface-conversion equipment required for that path should be identified separately in the proposed configuration and supply scope rather than assumed to be included with the radio.
Compare Related Models
Compare its 96 × 78 × 19 mm enclosure and ≤190 g device weight when installation space is a priority.
Review its nominal 16.8 V supply and 135 × 90 × 27.5 mm enclosure when comparing another link configuration.
Compare the 175 × 130 × 30 mm enclosure and ≤810 g device weight with your platform installation budget.
Consider its 115 × 92 × 28 mm footprint; request the supply requirements for the exact quoted version.
Request a Configuration Quote for XK-F305E
Send the video and control-terminal details, required channel bandwidth and actual supplies for your F305E project. Include the endpoint arrangement and unit quantities. Xingkai will check the listed 1.4 GHz, nominal 24 V configuration and quote the selected radios and connecting accessories.