XK-F202THS H.265 COFDM Video Transmitter
Select an H.265 COFDM transmitter for an HDMI or SDI video source. XK-F202THS pairs that encoding choice with a listed 30 dBm (1 W) RF configuration for a separately specified receiving system.
- H.265 video encoding provides a clear codec requirement for selecting the receiver.
- HDMI and SDI inputs suit digital camera outputs; listed formats include 1080p60.
- 8–25 V DC input, nominal 12 V, with ≤14 W consumption at 30 dBm (1 W).
- 108 × 85 × 27 mm and ≤272 g device weight provide the dimensions and load for installation planning.
XK-F202THS H.265 COFDM Video Transmitter Overview
XK-F202THS is an H.265 video transmitter with HDMI and SDI input choices. For a project selecting the video source and receiver together, its codec is a defining part of the link configuration, rather than a feature that can be assumed compatible with an existing H.264 receiving unit.
The listed 1 W configuration combines an 8–25 V DC input with a 108 × 85 × 27 mm enclosure. Xingkai checks the video format, frequency configuration and proposed receiving equipment, then quotes the selected units and accessories. The specification below uses the documented 1080-format entries; any higher-resolution requirement needs a configuration-specific confirmation.
Technical Specifications
Listed configuration. The quotation identifies the supplied units and accessories.
| Parameter | Listed configuration |
|---|---|
| Video inputs | HDMI / SDI |
| Video encoding | H.265 |
| Video formats | Listed formats include 1080p60 |
| Frequency configuration | 300–800 MHz customizable; 1 MHz step |
| RF output | 30 dBm (1 W) |
| Channel bandwidth | 2 / 3 / 4 / 6 / 7 / 8 MHz |
| Power input | 8–25 V DC; nominal 12 V |
| Power consumption | ≤14 W at 30 dBm (1 W) |
| Transmitter dimensions | 108 × 85 × 27 mm |
| Transmitter weight | ≤272 g |
| Video bitrate | 0.5–18.8 Mbps |
| Data port | RS232; 1200–115200 baud |
| Encryption | AES128 / AES256 |
| Operating temperature | −30 to +60 °C |
Connections and Integration
Connect the video source through HDMI or SDI and specify an H.265-capable receiving arrangement. RS232 configuration is listed at 9600 baud and the data port at 1200–115200 baud. Xingkai checks the selected camera format and receiver combination when defining the quotation; an H.264 receiver should not be presumed to decode this transmitter.
Configure the F202THS H.265 Link
Order F202THS as a 1 W HDMI/SDI transmitter with an H.265 receiving arrangement. The quotation identifies the selected frequency and bandwidth, transmitter and receiver quantities, and controller and accessory scope for the proposed installation.
Send the HDMI or SDI output format, receiver model and decoding capability, and required channel. State the available DC supply, mounting space, weight allowance and unit quantities.
Xingkai checks the F202THS 1 W configuration, H.265 receiving path and frequency requirement within the customizable 300–800 MHz range, then quotes the specified transmitter, receiving equipment, controller and accessories.
Agree the video format, frequency and bandwidth, and identify the components included. Check the listed 108 × 85 × 27 mm transmitter, ≤272 g device weight and ≤14 W operating condition against the installation, then confirm delivery terms.
Xingkai supplies and ships the agreed F202THS H.265 configuration and listed equipment according to the confirmed order.
FAQs
HDMI and SDI are listed as input choices; the specifications do not establish simultaneous multi-camera transmission. State the number of simultaneous feeds and the required receiving display arrangement so Xingkai can check an appropriate configuration.
Do not assume this pairing. XK-F202THS lists H.265 encoding, while H.265 decoding is not established by the XK-F110R specifications. Xingkai needs to check an appropriate receiving configuration.
No. The source labels about 260 ms as end-to-end transmission delay. It should not be compared directly with a radio-only or serial-data latency figure. Confirm the video format and complete system requirements for your application.
The ≤272 g entry is the transmitter weight. The source lists a controller separately; antennas, cables and mounting components also affect the installed assembly. Confirm the supplied items and assembly requirements in the quotation.
The listed range describes customizable equipment configuration. Provide the intended country or region and channel requirements; equipment capability does not establish authorization to transmit on a frequency.
Compare Related Models
Four-SDI-Input COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
1.4 GHz COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
HDMI, SDI and CVBS COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
COFDM HD Video Receiver. Compare the documented interfaces and supplied configuration for your project.
Request a Configuration Quote for XK-F202THS
Planning an H.265 link for an HDMI or SDI source? Send the camera format and identify the receiving equipment you intend to use, together with the available mounting space. Xingkai will check the F202THS 1 W configuration and quote its equipment scope.