XK-F110R COFDM HD Video Receiver
Receive a COFDM video signal and connect the decoded picture to your display system. XK-F110R provides HDMI and CVBS video outputs plus a DVB-ASI transport-stream output for receiving installations.
- HDMI and CVBS outputs support different display connections; DVB-ASI provides a transport-stream output.
- The listed 160–1600 MHz input range and selectable bandwidths provide receiver settings to match with the transmitter.
- 12–25 V DC input, nominal 12 V; listed operating current is ≤540 mA at 12 V.
- Infrared configuration and USB/TF firmware upgrade support the receiver’s setup and maintenance arrangement.
XK-F110R COFDM HD Video Receiver Overview
XK-F110R is the receiving end of a COFDM video system. It demodulates the radio signal and provides decoded video or a transport stream to downstream equipment, so the required display connection is an important part of selection.
For a proposed link using an XK-F10/XK-F11-series COFDM transmitter, Xingkai checks the exact model, hardware and firmware versions and radio/video settings before quoting the receiver and accessories. The family designation alone does not establish pairing compatibility.
Technical Specifications
Listed configuration. The quotation identifies the supplied units and accessories.
| Parameter | Listed configuration |
|---|---|
| Device role | COFDM video receiver |
| RF input frequency | 160–1600 MHz |
| Channel bandwidth | 2 / 3 / 4 / 6 / 7 / 8 MHz |
| Receive sensitivity | −103 dBm at 2 MHz; −97 dBm at 8 MHz |
| Power input | 12–25 V DC; nominal 12 V |
| Operating current | ≤540 mA at 12 V DC |
| Video outputs | HDMI; CVBS (NTSC/PAL) |
| HDMI output formats | 1080p / 1080i / 720p / 576p / 576i / 480p / 480i |
| Transport-stream output | DVB-ASI (EN 50083-9) |
| Video decoding | H.264; MPEG-2; VC-1; MPEG-4 Part 2; DivX; XVID |
| Configuration UART | RS232; 115200 baud; 8N1 |
| Data UART | RS232; 1200–115200 baud; 8N1 |
Connections and Integration
HDMI and CVBS provide video outputs, while ASI provides a DVB-ASI transport stream. The data UART uses RS232 levels at 1200–115200 baud; the configuration UART is listed at 115200 baud, 8N1. Match the receiver to the transmitter’s frequency, channel bandwidth, coding and encryption arrangement. Xingkai checks the proposed pairing before specifying the receiving equipment.
Configure and Order Your Receiver
Identify the COFDM transmitter to pair with XK-F110R, including its frequency, channel bandwidth, video coding and encryption settings. Specify whether the downstream equipment needs HDMI, CVBS or DVB-ASI output, along with the receiving-site power supply and receiver quantities. Xingkai checks the proposed pairing and output arrangement, then quotes the receiver and agreed accessories.
Confirm the supplied configuration, quantities and delivery terms before ordering. Xingkai arranges supply and dispatch according to the confirmed order.
Send the transmitter model and versions, radio and video settings, receiving-site conditions, power supply, required output connection and receiver quantities.
Xingkai checks the transmitter pairing and the receiving output requirements, then quotes the receiver and agreed antennas, cables and accessories.
Agree on the supplied configuration, quantities and delivery terms before proceeding.
Xingkai supplies and ships according to the confirmed order.
FAQs
That function is not established by the listed video and serial outputs. Describe any Ethernet or IP-traffic requirement separately from the video-display task. Xingkai can check whether the receiving arrangement fits or whether a different data-link product is needed.
H.265 decoding is not established by the listed specifications. Identify the transmitter and its encoding configuration; do not assume that a receiver listing H.264 will decode an H.265-only video stream.
No. −103 dBm is listed at 2 MHz bandwidth and −97 dBm at 8 MHz. Retain the bandwidth condition when comparing receiving requirements; neither figure alone defines an installed link distance.
ASI is a transport-stream interface, while the listed display-oriented video connections are HDMI and CVBS. Tell Xingkai the downstream equipment and input type so the receiving arrangement can be checked.
Use the F110R data UART for the application-data connection and reserve the configuration UART for receiver settings. Both are listed as RS232, but the configuration port is listed at 115200 baud while the data port covers 1200–115200 baud, with 8N1 for each. Record the selected data baud rate separately from the setup connection so a terminal intended for application data is not connected using the configuration-port settings.
Compare Related Models
Four-SDI-Input COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
1.4 GHz COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
HDMI, SDI and CVBS COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
H.265 COFDM Video Transmitter. Compare the documented interfaces and supplied configuration for your project.
Request a Configuration Quote for XK-F110R
Tell us the transmitter model and hardware/firmware versions, operating frequency, channel bandwidth, video coding and encryption settings for the proposed XK-F110R link. Include the HDMI, CVBS or DVB-ASI input required by your display or processing equipment, the receiving-site power supply and receiver quantities. Xingkai checks the proposed pairing and output arrangement and quotes the receiver and agreed accessories.